Southway House
Southway Drive
North Common
Bristol BS30 5LW
01173 12 13 14
info@gft.uk.com

Cretel

Container Washers

Container Washers

Features: Cretel Container Washers are built according to the CE standards and are equipped with all the necessary safety features and following characteristics: – A completely hygienic and open construction, without hidden places in corners or double folds. – Sufficient distance and separation between washing zones. – Sufficient distance between the washing and rinsing zones to avoid the mixing of the dirty washing water with the clean rinse water. This is a necessity if the articles to be cleaned must be disinfected and all the chemicals removed. CRETEL Cabin Washing Machines consists of: A washing cabin with: A ramp for loading & unloading A water tank, equipped with a circulation pump Filter elements Heating elements Spraying nozzles The ramp- a Container/Bin need to be manually placed onto the ramp and positioned into the fixation bars. These bars hold the container in position during the manipulation. The loading/unloading ramp is also the door. The ramp & Container to be washed is turned to 108°C. This assures a maximum drainage. The ramp is also equipped with a built-in fixed spraying pattern to clean the outside bottom of the item to be washed. The washing cabin, is carried out with a motorised rotating spraying arm, equipped with flat beam nozzles. The spraying pattern takes care of the washing and rinsing of the inside and the outside of the items to be cleaned. The complete washing cycle is freely adjustable, this depends of the degree of dirtiness. The washing cycle is divided in two steps: Step 1: An intensive washing cycle Step 2: A rinsing cycle Those steps can be shortened or extended in time, depending on the application. During the washing cycle, the water in the tank will be continuously recirculated and runs through the filters of the washing installation. The rinsing cycle takes his water supply directly from the cold or hot water network. If not available, a separate heater must be installed. The rinsing water runs back to the tank of the washing installation, refreshing the recirculating water A maximum amount of water and energy is saved. Washing and rinsing are two separated circuits Heating of the tank by: Electrical resistance : standard By direct steam injection Heat exchanger : water / water Heat exchanger : steam /...

read more

Modular tunnel washers

Modular tunnel washers

Overview Modular tunnel washers are available with a capacity up to 3400 crates/hour. An industrial tunnel washer consists mainly of 2 parts placed in line, a washing zone and a rinsing zone. Depending on the nominal capacity and the nature of the pollution of the articles to be cleaned the installation can be equipped with a pre-wash zone and/or multiple washing zones. The washing zones consist of a water tank, a circulation pump and a collector with spray tubes equipped with flat spray nozzles. This way, the water in the tank is constantly being re-circulated through the filters of the washing zone. The rinsing zone is equipped with spray tubes fed directly by warm or hot water network. The rinse water runs into the water tank of the washing zone which allows maximum recovery of water and energy. The total water consumption of the washing machine depends on the application and the type of installation, ranging from an average of 0.5L to 1L per article. The washing installation is completed with a transport system for transporting of articles to be cleaned through the installation. The transport system consists of necessary side guides, a hold down system and a transport chain or a conveyor belt. The transport speed is adjustable, which allows to shorten or to prolong the dwell time of articles in the tunnel of the machine. Chemical cleaning and disinfection is possible with the help of automatic dosing systems in the washing zones. Disinfection is also possible by injecting chemicals into the rinse water in the rinsing zone. The machine is built according to the CE standards and is equipped with all the necessary safety features. Features: All CRETEL washing machines have the following characteristics: – A completely hygienic and open construction, without hidden places in corners or double folds. – Sufficient distance and separation between washing zones. – Sufficient distance between the washing and rinsing zones to avoid the mixing of the dirty washing water with the clean rinse water. This is a necessity if the articles to be cleaned must be disinfected and all the chemicals...

read more

Stand alone tunnel washers

Stand alone tunnel washers

The stand alone tunnel washers consists mainly of 2 zones: washing and rinsing. The capacity varies between 80 and 400 crates/hour.   Under construction, please contact us for more details.

read more

Membrane Skinner 856PX

Membrane Skinner 856PX

Overview: Solid industrial membrane Skinner that complies with all the strict requirements that the contemporary meat industry dictates. Strong hygienic and accurately built to ensure the highest possible yield. The machine is moreover equipped with a compressed air cleaning system with built in micro-filter.   Applications: For membrane skinning of all kinds of meat (beef, pork, mutton, veal, lamb), game, poultry and duck.    Technical specification Model 856PX Skinning width 560 mm Dimensions 970x810x980 cm 38.2×31.9×38.6″ Weight  256 kg / 564 lbs Electrical load 1.1...

read more

Cretel Oannes 362 Skinner & Derinder

Cretel Oannes 362 Skinner & Derinder

Overview   Versatile table-top models for the skinning and deriding of meat and poultry, designed for butcheries, supermarkets, catering, etc. It is ideal for small or medium-sized operations. The machine is equipped with handles to facilitate the handling and with a safe 24-volt foot switch. The Oannes 362-series have been part of our product range for over 30 years. This completely reshaped table-top model keeps pace with the times and still uses the same well-tried concept to skin a wide spectrum of meat products.  A compact and solid stainless steel construction for efficient, reliable skinning with the highest yield. Applications Model 362SLM: For the derinding of all kinds of Pork. Model 362SKM: With defatting roller for membrane skinning of Pork, Beef, Veal, Mutton, Game and Poultry. Model 362FLP: For the skinning of poultry. Technical Specification Skinning width 360mm Throughput 20-40 pcs/min Dimensions in cm 59x40x34 cm Dimensions in in 23.2×15.7×13.4″ Weight 62 kg / 137 lbs Electrical load 0.75...

read more

Cretel Nobilis 460TAC Automatic Fish Skinner

Cretel Nobilis 460TAC Automatic Fish Skinner

Overview   This fully automatic fish skinner comes with in- and outfeed conveyor. It has a state of art pressure roller system on top of machine for an even better grip. The machine is equipped with vandal-proof Piezo-switches. The disassembly of the skinning shoe and the blade change can be done very quickly, without use of any tools. The in- and outfeed conveyor belts make the machine suitable for use in an industrial production line. This multi – purpose fish skinner is available with a range of toothed rollers to fit your application. Applications Industrial heavy- duty skinner for shallow and deep skin applications. Automatic skinning of all kinds of flat and round fish fillets, including fine and delicate types.   Technical Specification Model Nobilis 46OTAC Skinning width 460 mm Throughput 60-140 pcs/min Dimensions 110x70x100 cm Weight 175 kg/385 lbs Electrical load 1.1 kW...

read more

Cretel Nobilis 460TA Fish Skinner

Cretel Nobilis 460TA Fish Skinner

Overview The Nobilis 460TA is a semi-automatic fish skinner.  Comes with an outfeed conveyor. It has a state-of-the-art pressure roller system on top of the machine for an even better grip. The machine is equipped with vandal-proof Piezo-switches. The disassembly of the skinning shoe and the blade change can be done very quickly, without use of any tools. The in and out feed conveyor belts make the machine suitable for use in an industrial production line. This multi-purpose fish skinner is available with a range of toothed rollers to fit your application.   Technical Specification Skinning width 460mm Throughput 50-60 pcs/min Dimensions in cm 117x148x79 cm Dimensions in in 45.9×58.1×31″ Weight 150 kg / 331 lbs Electrical load 1.1...

read more

Cretel Nobilis 460TI Fish Skinner

Cretel Nobilis 460TI Fish Skinner

Overview The Nobilis 460TI Fish Skinner is a semi-automatic fish skinner and comes with an infeed conveyor. It has a state-of-the-art pressure roller system on top of the machine for an even better grip. The machine is equipped with vandal-proof Piezo-switches. The dis assembly of the skinning shoe and the blade change can be done very quickly, without use of any tools. The infeed conveyor belts make the machine suitable for use in an industrial production line. This multipurpose fish skinner is available with a range of toothed rollers to fit your application.   Aplications Skins all kind of flat fish and round fish fillets such as tilapia, butterfly, herring, plaice, whiting, squid, catfish.   Technical Specification Skinning width 460 mm Throughput 60-140 pcs/min Dimensions in cm 100 x 70 x 100 cm Dimensions in in 39 x 26 x 39″ Weight 165 kg / 364 lbs Electrical load 1.1...

read more

Cretel Nobilis 460T Fish Skinner

Cretel Nobilis 460T Fish Skinner

Overview The Nobilis 460T is especially developed for Tilapia and flat fish fillets. It has a state-of-the-art press roller system on top of the machine to for an even better grip. The fitted infeed plates make this skinner extremely safe in operation. The fully welded strong stainless steel frame has smooth surfaces which provide for extra hygiene. As goes for all Cretel skinners, this 460T also has extremely low maintenance and operating costs. Optionnaly, the machine can be equipped with infeed or / and outfeed conveyor (Nobilis 460TA or Nobilis 460TAC) Applications   Skins allkinds of flat fish and round fish filets, such as plaice, whiting, squid, tilapia and catfish. Technical Specification Skinning width 460mm Throughput 40-80 pcs/min Dimensions in cm 70.5 x 71 x 95 cm Dimensions in in 46.6 x 58 x 31″ Weight 200 kg / 441 lbs Electrical load 1.1...

read more

Cretel 702A Automatic Derinder

Cretel 702A Automatic Derinder

Overview An automatic derinding and membrane skinning machine for all kind of pork cuts. The cutting thickness can be adjusted to precision, even while in operation. The optimal distance between the press rollers and the blade is hence automatically controlled. The 702A features a very accurate gripping system. Built to operate reliably and perfectly under the most demanding working conditions. The conveyor belt and the hold-down roller can be opened without tools. The machine is equipped with damage resistant infeed and outfeed conveyor belts whose slope is adjustable so that it can be used in a production line. Applications For the derinding of all kinds of pork cuts (such as bellies, loins, bacons, fatbacks, jowls, etc) and for lard slicing. Model 702A Skinning width 700 mm Dimensions 244x113x110 cm 96.1×44.5×43.3 Weight 500 kg / 1.102 lbs Electrical load 2.2...

read more